Product instructions: Summer lawn fertilizer
Application steps for the summer lawn fertilizer
1. Provide the appropriate quantity
Before applying the fertilizer, you should weigh up the right amount for your lawn so that you don't end up applying too much. 20 g of fertilizer should be applied per m².
2. Apply with spreading aid
We recommend transferring the fertilizer outside the lawn and ideally using a fertilizer or disc spreader. Then use this to spread the fertilizer lengthwise and crosswise over the lawn.
Our tip: Use the turbo spreader on level 5.
3. Water thoroughly
The lawn should be well watered after application (approx. 8-10 liters per square meter). Alternatively, impending rain can be used for this. Watering ensures that the fertilizer is dissolved quickly and the nutrients reach the plants.
Spreader settings for summer lawn fertilizer:
Depending on the existing model, a different setting must be selected for the application of summer fertilizer. The recommended application rate is 20g/m². Our settings are based on customer feedback and are therefore constantly being improved.
Turbogreen: Turbogreen fertilizer spreader → Level 5
Your spreader wagon is not included? Then we recommend this option:
Mark out an area of 1 square meter on a flat surface (optionally, a film can be laid out on the surface). Spread the grit on this area with the spreader, then sweep it up again and weigh it. If it is approx. 20g/m², then the setting is correct. If it is too much/too little, optimize the level.
If you find an optimal setting for your spreader, we would be very pleased if you could pass on the relevant information about the model of your spreader wagon and the setting to us so that we can include it here. Unfortunately, there are so many different spreader settings that we cannot test them all.