Product instructions: Turbogreen watermanager

The Turbogreen Watermanager can be applied either to a new lawn or to an existing lawn. Please note the different areas of application.

Area of application New turf installation:
Turbogreen Watermanager is applied directly to the topsoil or the turf base layer and then milled in to a depth of 10-15 centimetres. The ideal dosage is 1 kg/m². The Turbogreen Watermanager does not need to be reapplied afterwards;

Area of application: existing turf:
Turbogreen Watermanager should be applied to an existing lawn 1-3 times a year, i.e. in spring, summer and fall. The water retention capacity ultimately depends on how you have previously worked your soil. We recommend working the soil mechanically before application, either by aerating, deep scarifying or aerating.

It is most efficient to apply the Turbogreen Watermanager after the Aerate to be applied. This is followed by the efficiency Deep scarifying, Scarifying and finally Ventilate. Turbogreen Watermanager should be applied three times a year for aeration and scarifying, twice a year for deep scarifying and once a year for aerating. The ideal dosage in each case is 100 g/m².

The advantages of the Turbogreen Watermanager are:
As this is not a fertilizer, the lawn cannot be over-fertilized, so you cannot apply too much. At the same time, hydrophobicity (water-repellent property) is prevented, and up to 20 percent of watering costs can be saved with our Watermanager!

• The Watermanager is milled directly into the topsoil/turf base layer. This should be mixed with the turf base layer to a depth of 10-15 centimetres.

• The ideal quantity is 1 kg/m²

• The Watermanager does not need to be reapplied afterwards;

• Hydrophobia is prevented.

• Up to 20 percent of irrigation costs can be saved with our Watermanager.

Waiting time between the Turbogreen Watermanager and other products:
No waiting time is necessary - the Turbogreen Watermanager can be used directly after other products without any problems.